WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer; Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
WARNING: This product can expose you to chemicals including nickel, cobalt and lead, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
![[0, ]](/img/warning.png)
California Proposition 65
Straight router bits, long series
7/8/912
- Beautiful clean edge on your finished piece
- These razor-sharp, double-faced cutters made of special Fatigue Proof® steel and micrograin carbide can withstand even the heaviest work load and still give you a smooth, precise cut every time.
- Exceptional chip ejection to allow cleaner and more constant cutting.
- Surface of all CMT bits is protected with our trademark orange non-stick PTFE to help keep the bit from collecting resin, pitch and other residue.
- Every bit is submitted to strict quality tests to guarantee perfect cutting tolerance, balance and concentricity. CMT bits allow production on an industrial scale using a variety of plywood, composites and natural woods.
Safety precautions:
- Never use damaged or worn bits.
- Always work at the recommended proper feed rate without forcing the bit.
- Pay particular attention when making the initial cut with a small diameter bit.
- For best results when working with small diameter bits, make the cut in more than one pass.
.png)
The sharpened cutting edge on 9mm diameter bits or larger are perfect for short plunging operations.
* Warning!!
912.623.11:
Warning: Long cutting edge.
Carefully make several shallow passes to prevent damaging the tool.
The warranty does not cover improper or incorrect use of the tool.
* Warning!!
912.623.11:
Warning: Long cutting edge.
Carefully make several shallow passes to prevent damaging the tool.
The warranty does not cover improper or incorrect use of the tool.
Details
TECHNICAL DETAILS:
- Premium quality HWM.
- Special positively ground cutting edge sharpening
for excellent finish.
Variations
Filter
| Item Code | Description | D | I | L | S | Z | MAT | RH-LH | |
|---|---|---|---|---|---|---|---|---|---|
|
812.060.11
|
15/64'' | 1'' | 2-3/8'' | 1/4'' | 2 | HWM | RH | ||
|
812.064.11
|
1/4'' | 1'' | 2-3/8'' | 1/4'' | 2 | HWM | RH | ||
|
812.064.11-X10
|
10 pcs masterpack | 1/4'' | 1'' | 2-3/8'' | 1/4'' | 2 | HW | RH | |
|
812.564.11
|
For Industrial Nesting Application | 1/4'' | 1'' | 2-7/8'' | 1/2'' | 3 | HWM | RH | |
|
812.581.11
|
For Industrial Nesting Application | 5/16'' | 1-1/8'' | 3'' | 1/2'' | 3 | HWM | RH | |
|
812.080.11
|
5/16'' | 1-1/4'' | 2-3/8'' | 1/4'' | 2 | HWM | RH | ||
|
812.095.11
|
3/8'' | 1-1/4'' | 2-1/2'' | 1/4'' | 2 | HW | RH | ||
|
812.595.11
|
3/8'' | 1-1/4'' | 2-7/8'' | 1/2'' | 2 | HW | RH | ||
|
812.600.11
|
10mm | 1-1/4'' | 2-3/4'' | 1/2'' | 2 | HW | RH | ||
|
812.100.11
|
10mm | 1-1/4'' | 2-3/8'' | 1/4'' | 2 | HW | RH | ||
|
812.611.11
|
For Leigh jig | 7/16'' | 1-1/4'' | 3-1/4'' | 1/2'' | 2 | HW | RH | |
|
812.620.11
|
12mm | 1-1/4'' | 2-3/4'' | 1/2'' | 2 | HW | RH | ||
|
812.621.11
|
12mm | 1-1/2'' | 3-3/4'' | 1/2'' | 2 | HW | RH | ||
|
812.120.11
|
12mm | 1-1/4'' | 2-3/8'' | 1/4'' | 2 | HW | RH | ||
|
812.127.11
|
1/2'' | 1-1/4'' | 2-3/4'' | 1/4'' | 2 | HW | RH | ||
|
812.627.11
|
1/2'' | 1-1/2'' | 3-3/4'' | 1/2'' | 2 | HW | RH | ||
|
812.627.11-X10
|
10 pcs masterpack | 1/2'' | 1-1/2'' | 3-3/4'' | 1/2'' | 2 | HW | RH | |
|
812.628.11
|
1/2'' | 2'' | 4-1/4'' | 1/2'' | 2 | HW | RH | ||
|
812.629.11
|
1/2'' | 2-1/2'' | 4-3/8'' | 1/2'' | 2 | HW | RH | ||
|
812.140.11
|
14mm | 1-1/4'' | 2-3/8'' | 1/4'' | 2 | HW | RH | ||
|
812.150.11
|
15mm | 1-1/4'' | 2-19/32'' | 1/4'' | 2 | HW | RH | ||
|
812.158.11
|
5/8'' | 1-1/4'' | 2-3/4'' | 1/4'' | 2 | HW | RH | ||
|
812.160.11
|
16mm | 1-1/4'' | 2-19/32'' | 1/4'' | 2 | HW | RH | ||
|
812.660.11
|
16mm | 1-1/4'' | 2-3/4'' | 1/2'' | 2 | HW | RH | ||
|
812.690.11
|
3/4'' | 1-1/2'' | 3-1/4'' | 1/2'' | 2 | HW | RH | ||
|
812.691.11
|
3/4'' | 2'' | 3-5/8'' | 1/2'' | 2 | HW | RH |