Print Watch video

Entry & interior door router bit sets

SERIES:  8/900.527

Tungsten carbide tipped tool Two cutting edges Right-hand rotation Tool with anti-kickback design Tool with bearing For use on router tables only icona_axial_angle_alt mancante!
Description S Order No. Buy now Availability
3 piece entry & interior door router bit set 1/2" 800.527.11 Buy now Not available
 
This CMT three-piece router bit set simplifies door construction, making it easy as 1, 2, 3! It is not the only advantage, in fact this is a multifunctional set for door and furniture makers building entry or passage doors and any furniture tenons. Along with the cope cutter, this means you can craft long and strong tenons with minimum setup. As an extra bonus, the tenon cutter can be used for making furniture requiring tenons anywhere from 4.7mm (3/16") to 16mm (5/8") in thickness.
 Item  Router bits included in the set
800.527.11   800.628.11 
  855.806.11 
File
File description
Watch video
Watch the product video!
Download file
Entry & Interior door router bit set instruction manual
1. Cut the tenon into the rails.- product picturezoom 1. Cut the tenon into the rails.
2. Cut the groove and door profile in pieces.- product picturezoom 2. Cut the groove and door profile in pieces.
3. Undercut the tenons to cope the ends of the rails.- product picturezoom 3. Undercut the tenons to cope the ends of the rails.
Application example.- product picturezoom Application example.
Door construction.- product picturezoom Door construction.