zoom
zoom| I | P | D | H | S | Order No. | Buy now | Availability |
|---|---|---|---|---|---|---|---|
| 1/16" | 0.042 | 1-7/8" | 1/2" | 1/2" | 822.316.11B |  |
 |
| 1/16" | 0.042 | 1-7/8" | 1/2" | 1/4" | 822.316.11A | |
|
| 5/64" | 0.050 | 1-7/8" | 1/2" | 1/2" | 822.320.11B | |
 |
| 5/64" | 0.050 | 1-7/8" | 1/2" | 1/4" | 822.320.11A | |
|
| 3/32" | 0.050 | 1-7/8" | 1/2" | 1/2" | 822.324.11B | |
|
| 3/32" | 0.050 | 1-7/8" | 1/2" | 1/4" | 822.324.11A | |
|
| 1/8" | 0,050 | 1-7/8" | 1/2" | 1/2" | 822.332.11B | |
|
| 1/8" | 0.050 | 1-7/8" | 1/2" | 1/4" | 822.332.11A | |
|
| 5/32" | 0.081 | 1-7/8" | 1/2" | 1/2" | 822.340.11B | |
|
| 5/32" | 0.081 | 1-7/8" | 1/2" | 1/4" | 822.340.11A | |
|
| 3/16" | 0.112 | 1-7/8" | 1/2" | 1/2" | 822.348.11B | |
|
| 3/16" | 0.112 | 1-7/8" | 1/2" | 1/4" | 822.348.11A | |
|
| 15/64" | 0.175 | 1-7/8" | 1/2" | 1/2" | 822.360.11B | |
|
| 15/64" | 0.175 | 1-7/8" | 1/2" | 1/4" | 822.360.11A | |
|
| 1/4" | 0.175 | 1-7/8" | 1/2" | 1/2" | 822.364.11B | |
|
| 1/4" | 0.175 | 1-7/8" | 1/2" | 1/4" | 822.364.11A | |
|
Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, T-molding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and the trademarked orange non-stick PTFE coating.
Note: for biscuit joints, use slot cutter with 4mm (5/32”) cutting length.
File |
File description |
 |
How to make your own open bar |
Websolute