Print Watch video

Entry & interior door router bit set

SERIES:  800.527

Tungsten carbide tipped Two cutting edges Right-hand rotation Anti-kickback design Tool with bearing For use on router tables only
Entry & interior door router bit set - product picturezoomEntry & interior door router bit set - technical drawingzoom
Description S Order No. Buy now Availability
3 piece entry & interior door router bit set 1/2 800.527.11 Buy now Available
This CMT three-piece router bit set simplifies door construction, making it easy as 1, 2, 3! It is not the only advantage, in fact this is a multifunctional set for door and furniture makers building entry or passage doors and any furniture tenons. The included tenon cutter produces a beefy 27mm (1-1/16”) long tenon. Coupled with the cope cutter, you can produce long and strong tenons with minimum setup. As an extra bonus the tenon cutter can be used for furniture making requiring any tenon from 4,7mm (3/16”) to 16mm (5/8”) thick.
 Item  Router bits included in the set
800.527.11   800.628.11 
  855.806.11 
File
File description
Watch video
Watch the product in action!
Download file
Entry & Interior door router bit set instruction manual
Step 1. Cut the tenon in the rails.- product picturezoom Step 1. Cut the tenon in the rails.
Step 2. Cut the groove and the door profile in all pieces.- product picturezoom Step 2. Cut the groove and the door profile in all pieces.
Step 3. Undercut the tenon to cope the ends of the rails.- product picturezoom Step 3. Undercut the tenon to cope the ends of the rails.
Application example.- product picturezoom Application example.
Door construction.- product picturezoom Door construction.