Print

3D Router Carver system

SERIES:  RCS

Description S Order No. Buy now Availability
3D Router Carver bit & sleeve 1/2" RCS-BIT Buy now Available
3D Router Carver system DVD   RCS-DVD Buy now Not available
3D Router Carver system starter set 1/2" RCS-STS Buy now Available
Exclusively from your CMT distributor

Thanks to the patented 3D Router Carver system, anyone with a plunge router can create beautiful designs in just minutes. Decorate doors, drawers, cabinets, furniture or just about any flat wooden surface with one or more of these designs. How does it work? The secret is in the 3D Router Carver Bit and the way that bit interacts with the carving templates. The V-Groove router bit is enclosed in a 45ļ cone-shaped guide. You rout with the plunge mechanism of your router unlocked, allowing the bit to move up or down as the router moves forward. As the slot in the template get wider, the bit moves down, producing a wider, deeper V-groove. As the slot gets narrower, the bit moves up, and the groove gets narrower and shallower. It sounds simple, and it is! (thatís why the system is patented worldwide).

What do you need to get started?
-The 3D Router Carver bit.
-The Carver template of your choice.
-The holding frame to match your template.
-Your plunge router.

Be sure the opening in the base of your router is at least 47,6mm (1-7/8") in diametre. If it isnít, youíll need to make a sub-base to accept the large diametre of the 3D Carver bit.

 Item  Nut  STEI screw  Wrench key for RCS  3D Router Carverô spare bit  Alu shield for RCS-BIT  Sleeve  Sleeve (optional)
RCS-BIT   990.092.00 
  990.091.00 
  991.007.00 
  RCS-CUT 
  RCS-SHIELD 
  RCS-SLE 
  RCS-SLEEVE 
File
File description
Download file
RCS - Istruzioni in inglese
1) Clamp or tack the holding frame to your workpiece.- product picturezoom 1) Clamp or tack the holding frame to your workpiece.
2. Drop the template into the holding frame.- product picturezoom 2. Drop the template into the holding frame.
3. Plunge the bit into a wide part of the slot and rout with the .routerís plunge mechanism unlocked.- product picturezoom 3. Plunge the bit into a wide part of the slot and rout with the .routerís plunge mechanism unlocked.
4. With the frame still in place, flip the template & rout again. Some templates will be routed 2 to 4 times, depending on the complexity of the design.- product picturezoom 4. With the frame still in place, flip the template & rout again. Some templates will be routed 2 to 4 times, depending on the complexity of the design.
5. Remove the frame and youíre finished!- product picturezoom 5. Remove the frame and youíre finished!